Aventail Link combines model execution with a gateway. It runs compatible models on your hardware and applies local routing policy to supported app requests, selecting an allowed destination. Control manages the device and its configuration. We use Link for short. Version 2.x is Aventail; the 1.x releases are Locai Link (Legacy Aventail). Historical screenshots retain the labels shown in those releases.
AVENTAIL / LINK
Use the current Link window
1 / 6
Full view
Use the current Link window
Models, Routing, Connected apps and Settings are separate tabs. This example uses a cloud primary and a prepared local backup.
Find the section
Check the serving destination
The outlined area is shown close up on the next slide.
Close-up
Check the serving destination
Models shows the cloud destination in use and a local model marked Backup. A prepared backup loads when needed; Start serving is a separate local-serving control.
Slide 04
Inspect the applied route
Routing shows the primary destination followed by the final local backup. Check Applied on this device; Manage in Control opens the editor. A displayed order does not prove failover has been tested.
Slide 05
Choose Connect beside the app
Open Connected apps and choose Connect beside the installed app. Apps not found on this computer appear under Other supported apps. These captures show the state before connecting.
Slide 06
Find startup and appearance settings
Settings contains Start at login, appearance, Device details, Logs and diagnostics, and uninstall controls.
Slide 1 of 6: Use the current Link window.
Aventail Link 2.4.1 on macOS · captured 14 November 2026. Account/device identity obscured. Model names and memory values are examples. Use the arrows or progress marks to move between slides.Read the Link overview and update steps
The current Aventail Link macOS package installs a desktop setup and a background service in your user account. Its command is aventail; Locai Link (Legacy Aventail) 1.x uses locai.
Use the release channel for your Control environment. Moving from 1.x requires a new registration and model deployments; read migration guidance before installing.
The current Link interface groups Models, Routing, Connected apps and Settings. The screenshots show 2.4.1; the earlier 2.3.x layout omits Routing. Open Models to add a model, start or stop serving, and inspect its serving settings. Use Aventail Connect for supported common apps; use the integration reference for your own software.
The production latest-release record reported 2.4.1 on 14 November 2026. Package availability and Control feature rollout are separate checks. See the release notes for the redesign, current environment variables and recovery changes.
AVENTAIL / CONNECT
Connect apps with a cloud-first route
1 / 7
Full view
Connect apps with a cloud-first route
Check the serving destination and local backup, then open Connected apps. The applied route determines where eligible model requests run.
Find the section
Check the serving destination
The outlined area is shown close up on the next slide.
Close-up
Check the serving destination
Models shows the cloud destination in use and a local model marked Backup. A prepared backup loads when needed; Start serving is a separate local-serving control.
Slide 04
Inspect the applied route
Routing shows the primary destination followed by the final local backup. Check Applied on this device; Manage in Control opens the editor. A displayed order does not prove failover has been tested.
Slide 05
Choose Connect beside the app
Open Connected apps and choose Connect beside the installed app. Apps not found on this computer appear under Other supported apps. These captures show the state before connecting.
Slide 06
Finish the change and verify the result
Follow any instruction to finish sessions or quit the app, then start a fresh session. Check the connection status, send a harmless question and inspect its reported destination.
Process overview
1
Finish active workClose sessions if Link requests it.
2
Fresh sessionCheck the connected model.
3
Verify destinationInspect the completed request in Control.
Slide 07
Verify the response and destination
A connected label confirms configuration. Confirm a completed response, then inspect Link’s routing state and Requests in Control. For Link 2.4.0, open the device’s Routing page to check its applied first destination and backups.
Process overview
1
Fresh sessionCheck the connected model.
2
Harmless testWait for a completed answer.
3
Request evidenceCheck the destination and reported outcome.
Slide 1 of 7: Connect apps with a cloud-first route.
Aventail Link 2.4.1 on macOS · captured 14 November 2026. Account/device identity obscured. Model names and memory values are examples. Use the arrows or progress marks to move between slides.
Starting the agent and starting a model's serving endpoint are separate actions. Use the Aventail menu bar for quick controls, or open the current Link window and use Models, Connected apps and Settings. Earlier 2.0.0 releases grouped those controls under Preferences.
For a terminal installation:
aventail status
If the desktop app has not added the command to PATH, use the full executable path.
Read the release notes and finish active requests. Check for an update before applying it:
aventail update --check aventail update
The second command applies an available update and restarts the daemon. Check aventail status using the same executable path afterward, confirm Online in Control and repeat a short inference request.
For Locai Link (Legacy Aventail) 1.x, the corresponding commands are locai status and locai update. Running the old command does not operate the new Aventail service. Keep any error output; do not reinstall merely because an update check fails.
Earlier Link installation overview
AVENTAIL / LINK
Run models on your device
1 / 4
Full view
Aventail Link Setup
The four stages remain visible in the sidebar. Start by connecting this installation to your account.
Find the section
Connect and Sign in with Aventail
The outlined area is shown close up on the next slide.
Close-up
Sign in to Aventail
Select Sign in with Aventail. In the browser, check the account and organisation before approving this device.
The captured 2.0.0 build opens development Control. Use the environment intended for your package.
Slide 04
After installation
Use Preferences or the menu bar for day-to-day controls. Review release notes before updating.
Process overview
1
AgentKeep Link running and connected
2
ModelDeploy and start serving
3
ApplicationsChat or send API requests
Slide 1 of 4: Aventail Link Setup.
Aventail Link 2.0.0 setup; agent operation and model serving are separate. Use the arrows or progress marks to move between slides.